R3204P16-HP Load Balancing Module System Management Command Reference-6PW101

Field Descri

tion

clock stratum

Stratum level of the clock source, which determines the clock precision. The value

ranges from 1 to 16. The clock precision decreases from stratum 1 to stratum 16.

A stratum 1 clock has the highest precision, and a stratum 16 clock is not

synchronized and cannot be used as a reference clock.

clock status

Status of the clock source corresponding to this session, including

• configured: The session was created by a configuration command.

• dynamic: This session is established dynamically.

• master: The clock source is the primary reference source of the current system.

• selected: The clock source has survived the clock selection algorithm.

• candidate: The clock source is the candidate reference source.

• sane: The clock source has passed the sane authentication.

• insane: The clock source has failed the sane authentication.

• valid: The clock source is valid, which means the clock source meet the

following requirements: it has passed the authentication and is being

synchronized; its stratum level is valid; its root delay and root dispersion values

are within their ranges.

• invalid: The clock source is invalid.

• unsynced: The clock source has not been synchronized or the value of the

stratum level is invalid.

reference clock ID

Reference clock ID of the clock source

1. If the reference clock is the local clock, the value of this field is related to the

stratum level of the clock source:

• When the stratum level of the clock source is 0 or 1, this field is “LOCL”;

• When the stratum level of the clock source has another value, this field is the IP

address of the local clock.

2. If the reference clock is the clock of another device on the network, the value

of this field is the IP address of that device.

local mode

Operation mode of the local device, including

• unspec: The mode is unspecified.

• active: Active mode.

• passive: Passive mode.

• client: Client mode.

• server: Server mode.

• bdcast: Broadcast server mode.

• control: Control query mode.

• private: Private message mode.

local poll

Poll interval of the local device, in seconds. The value displayed is a power of 2.

For example, if the displayed value is 6, the poll interval of the local device is 2

or 64 seconds.