R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

124
Select System > Maintenance from the navigation tree, and then click the Initialize tab to enter the
initialize confirmation page, as shown in Figure 71.
Figure 71 Initialize
Click the Restore Factory-Default Settings button to restore the system to factory default configuration.
Managing configuration files at the CLI
The device provides the configuration file management function. You can manage configuration files on
the user-friendly CLI.
Saving the running configuration
Introduction
To make configuration changes take effect at the next startup of the device, you can save the running
configuration to the startup configuration file before the device reboots.
Complete these tasks to save the current configuration:
Task Remarks
Encrypting a configuration file Optional
Modes in saving the configuration Required
Encrypting a configuration file
Configuration file encryption enables you to encrypt a configuration file before saving it by using the
save command. To read the encrypted configuration file, you must decrypt it with a legal key, thus
protecting the configuration file. Two kinds of keys are supported to encrypt a configuration file. You can
select either of them according to your application environment:
• Private key: A configuration file encrypted by this kind of key can be decrypted and recognized
only by the local device.
• Public key: A configuration file encrypted by this kind of key can be decrypted and recognized by
all devices supporting this feature.
Follow the steps below to enable configuration file encryption:
To do… Use the command…
Remarks
Enter system view system-view —