R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

132
Figure 73 Network diagram for device reboot
Configuration procedure
• Select System > Reboot from the navigation tree.
• Click Apply to reboot the LB.
• Wait until the reboot result page appears.
• Click Relogin to log in to the web interface again.
Rebooting the LB module in the CLI
Rebooting the LB module
You can reboot the LB module immediately or at a future time.
Follow the step to immediately reboot the LB module in the CLI:
To do… Use the command…
Remarks
Reboot the whole system
immediately
reboot
Required
Available in user view
Follow these steps to reboot the LB module at a future time in the CLI:
To do… Use
the command… Remarks
Enable the scheduled reboot
function and specify a specific
reboot time and date
schedule reboot at hh:mm [ date ]
Required
Use either approach.
The scheduled reboot function is
disabled by default.
Available in user view.
Enable the scheduled reboot
function and specify a reboot
waiting time
schedule reboot delay { hh:mm |
mm }
CAUTION:
• Device reboot might result in interruption of ongoing services. Use these commands with caution.
• Before rebooting the LB module, use the save command to save the current configurations.
• Before rebooting the LB module, use the commands of display startup and display boot-loader to
check whether the configuration file and boot file to be used at the next boot are configured.
• The precision of the rebooting timer is 1 minute. One minute before the rebooting time, the LB module
prompts “REBOOT IN ONE MINUTE” and reboots in one minute.
• If you are performing file operations when the LB module reboots, the module does not reboot.