R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

134
CLI configuration
What is CLI?
The command line interface (CLI) enables you to interact with your device by typing text commands. At
the CLI, you can instruct your device to perform a given task by typing a text command and then pressing
Enter. Compared with the graphical user interface (GUI) where you can use a mouse to perform
configurations, the CLI allows you to input more information in one command line.
Figure 74 CLI example
****************************************************************************
* *
* HPA Series SecBlade LB Module BootWare, Version 1.38 *
* *
****************************************************************************
Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P.
Compiled Date : Apr 5 2011
CPU Type : XLR732
CPU L1 Cache : 32KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 2048MB
Memory Speed : 533MHz
BootWare Size : 1536KB
Flash Size : 4MB
cfa0 Size : 247MB
CPLD Version : 3.0
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Starting to get the main application file--cfa0:/lb.bin!....................
...............................................................
The main application file is self-decompressing.............................
............................................................................
............................................................................
............................................................................
User interface con0 is available.
Press ENTER to get started.
<HP>