R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

13
Figure 9 Configuration page
4. Execute commands to configure the device or check the running status of the device. To get help,
type ?.
Console login authentication modes
The following authentication modes are available for console port login: none, password, and scheme.
• none—Requires no username and password at the next login through the console port. This mode
is insecure.
• password—Requires password authentication at the next login through the console port.
• scheme—Requires username and password authentication at the next login through the console
port. Authentication falls into local authentication and remote authentication. To use local
authentication, configure a local user and related parameters. To use remote authentication,
configure the username and password on the remote authentication server. For more information
about authentication modes and parameters, see Security Configuration Guide.
The following table lists console port login configurations for different authentication modes:
Authentication
mode
Configuration Remarks
None Configure not to authenticate users
For more information, see
“Configuring none
authentication for console
login.”
Password
Configure to authenticate users by using the local
password
For more information, see
“Configuring password
authentication for console
login.”
Set the local password