R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

16
To do… Use the command… Remarks
Configure common settings
for console login
—
Optional
See “Configuring common settings for
console lo
gin (optional).”
When you log in to the device through the console port after configuration, you are prompted to enter a
login password. A prompt such as <HP> appears after you input the password and press Enter, as shown
in Figure 11.
Figure 11 Configuration page
Configuring scheme authentication for console login
Configuration prerequisites
You have logged in to the device.
By default, you can log in to the device through the console port without authentication and have user
privilege level 3 after login. For information about logging in to the device with the default configuration,
see “Configuration requirements.”
Configuration procedure
Follow these steps to configure scheme authentication for console login:
To do… Use the command…
Remarks
Enter system view system-view —
Enter console user interface
view
user-interface console
number
—