R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

17
To do… Use the command… Remarks
Specify the scheme
authentication mode
authentication-mode scheme
Required
Whether local or RADIUS authentication is
adopted depends on the configured AAA
scheme.
By default, users that log in through the
console port are not authenticated.
Return to system view quit —
Configure
the
authentica
tion mode
Enter the ISP
domain view
domain domain-name
Optional
By default, the AAA scheme is local.
If you specify the local AAA scheme, you
need to perform local user configuration. If
you specify an existing scheme by providing
the radius-scheme-name argument, perform
the following configuration as well:
• For RADIUS configuration, see Security
Configuration Guide.
• Configure the username and password
on the AAA server. (For more
information, see Security Configuration
Guide.)
Apply the
specified AAA
scheme to the
domain
authentication default { local
| none | radius-scheme
radius-scheme-name
[ local ] }
Exit to system view quit
Create a local user and enter
local user view
local-user user-name
Required
By default, a local user named admin
exists.
Set the authentication password
for the local user
password { cipher | simple }
password
Required
Specifies the command level of
the local user
authorization-attribute level
level
Optional
By default, the command level is 0.
Specify the service type for the
local user
service-type terminal
Required
By default, no service type is specified.
Configure common settings for
console login
—
Optional
See “Configuring common settings for
console lo
gin (optional).”
When users adopt the scheme mode to log in to the device, the level of the commands that the users can
access depends on the user privilege level defined in the AAA scheme.
• When the AAA scheme is local, the user privilege level is defined by the authorization-attribute
level level command.
• When the AAA scheme is RADIUS, the user privilege level is configured on the RADIUS server.
• For more information about AAA and RADIUS, see Security Configuration Guide.
After the configuration, when you log in to the device through the console port, you are prompted to enter
a login username and password. A prompt such as <HP> appears after you input the password and
username and press Enter, as shown in Figure 12.