R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

30
Web login
Web login overview
The device provides the web-based network management function to facilitate device operation and
maintenance. With this function, the administrator can visually manage and maintain network devices
through web-based configuration interfaces.
Configuration guidelines
• The Web-based configuration interface supports the operating systems of Windows XP, Windows
2000, Windows Server 2003 Enterprise Edition, Windows Server 2003 Standard Edition,
Windows Vista, Linux and MAC OS.
• The Web-based configuration interface supports the browsers of Microsoft Internet Explorer 6.0
SP2 and higher, Mozilla Firefox 3.0 and higher, Google Chrome 2.0.174.0 and higher, and the
browser must support and be enabled with JavaScript.
• The Web-based configuration interface does not support the Back, Next, Refresh buttons provided
by the browser. Using these buttons may result in abnormal display of Web pages.
• When the device is performing the spanning tree calculation, you cannot log in to or use the Web
interface.
• As the Windows firewall limits the number of TCP connections, when you use IE to log in to the Web
interface, sometimes you may be unable to open the Web interface. To avoid this problem, it is
recommended to turn off the Windows firewall before login.
• If the software version of the device changes, you are recommended to clear the cache data on the
browser before logging in to the device through the Web interface; otherwise, the Web page
content may not be displayed correctly.
• You can display at most 20,000 entries that support content display by pages.
Logging in to a LB module by using the default web
login information
A LB module comes with the default web login information. You can log in to the web interface of the
module by using the following default login information:
• Username: admin
• Password: admin
• Management interface: GigabitEthernet0/1
• IP address of the management interface: 192.168.0.1/24