R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

33
To do… Use the command… Remarks
Associate the HTTP service
with an ACL
ip http acl acl-number
Optional
By default, the HTTP service is not
associated with any ACL.
Associating the HTTP service with an ACL
enables the device to allow only clients
permitted by the ACL to access the device.
Create a local user and
enter local user view
local-user user-name
Required
By default, a local user named admin
exists.
Configure a password for
the local user
password { cipher | simple }
password
Required
By default, the password is admin for the
local user named admin.
Specify the command level
of the local user
authorization-attribute level level
Required
By, default, the user level for the local user
named admin to log in to the Web
interface is 3.
Specify the Telnet service
type for the local user
service-type web
Required
By default, the service type of the local user
named admin is Telnet.
Exit to system view quit —
Enter management Ethernet
interface view
interface type interfac-number Required
Assign an IP address and
subnet mask to the
management Ethernet
interface
ip address ip-address { mask |
mask-length }
Required
By default, the IP address of the
management Ethernet interface is
192.168.0.1/24
Configuring HTTPS login
Follow these steps to configure HTTPS login:
To do… Use the command…
Remarks
Enter system view system-view —
Associate the HTTPS
service with an SSL
server policy
ip https
ssl-server-policy
policy-name
Required
By default, the HTTPS service is not associated with any
SSL server policy.
• If you disable the HTTPS service, the system
automatically de-associates the HTTPS service from
the SSL service policy. Before re-enabling the HTTPS
service, associate the HTTPS service with an SSL server
policy first.
• Any changes to the SSL server policy associated with
the HTTP service that is enabled do not take effect.