R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

47
Monitoring and managing the LB module on the
network device
Resetting the system of the LB module
If the operating system of the LB module works abnormally (for example, the system does not respond),
you can reset the system with the following command.
The LB module has an independent CPU; therefore, the network device can still recognize and control the
LB module after you reset the system of LB module.
Follow the step to reset the system of the LB module:
To do… Use the command…
Remarks
Reset the system of the LB module
When the network device works in
standalone mode:
oap reboot slot slot-number
Required
Available in user view
When the network device works in
IRF mode:
oap reboot chassis
chassis-number slot slot-number
CAUTION:
Resetting the LB module may cause data loss and service interruption. Therefore, before resetting the LB
module, save the configurations of the LB module operating system and shut down the LB module
operating system to avoid service interruption and data loss.
Configuring the ACSEI protocol
Introduction to ACSEI
ACSEI is a proprietary protocol. It provides a method for exchanging information between ACFP clients
and ACFP server. It supports Application Control Forwarding Protocol (ACFP), ensuring information
interaction between the ACFP clients and the ACFP server, so that the ACFP server and clients can
cooperate to run a service.
As a supporting protocol of ACFP, ACSEI also has two entities: server and client.
• The ACSEI server is integrated into the software system (Comware) of the network device.
• The ACSEI client is integrated into the software system (Comware) of the LB module.
NOTE:
A
CFP is desi
g
ned based on the Open Application Architecture (OAA). The collaborating IDS (Intrusion
Detection System) modules or IDS devices serve as the ACFP clients which run applications of other
v
endors and support the IPS (Intrusion Prevention System)/IDS services.
Functions of ACSEI
ACSEI mainly provides the following functions:
• Registration and deregistration of an ACSEI client to the ACSEI server.