R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

51
Warning: This command may lose the data on the hard disk if the OAP is not being
shut down! Continue? [Y/N]:y
Reboot OAP by command.
The output shows that you can restart the LB module on the network device.
2. Display the ACSEI server configuration information on the network device.
<Switch> display current-configuration configuration acsei-server
#
acsei server
acsei timer clock-sync 10
acsei timer monitor 10
#
return
[Switch]
The output shows that the clock synchronization timer and monitoring timer from the network device to the
LB module are 10 minutes and 10 seconds, respectively.