R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

64
Device management
NOTE:
• Many types of storage media are available, such as Flash, compact Flash (CF), universal serial bus
(USB) disk.
• The configuration tasks in this document are independent. You can perform these tasks as needed in any
order.
Device management overview
Through the device management function, you can view the current working state of the SecBlade load
balancing (LB) module, configure running parameters, and perform daily device maintenance and
management.
Configuring the device name
NOTE:
You can configure the device name in the web interface or the comand line interface (CLI).
Configuring the device name in the web interface
You can set the system name of the SecBlade LB module. The current system name is on the very top of
the navigation tree, as shown in Figure 37.
Figure 37 Current system name
Select System > Device Management from the navigation tree, and click the Device Basic Info tab to enter
the page shown in Figure 38.
Figure 38 Device basic i
nformation