R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

Figure 40 Network diagram for scheduled task configuration

Configuration procedure

# Enter system view.

<Sysname> system-view

# Create scheduled task pc1, and enter its view.

[Sysname] job pc1

# Configure the task to be executed in the view of GigabitEthernet 0/1.

[Sysname-job-pc1] view GigabitEthernet 0/1

# Configure the SecBlade LB module to start GigabitEthernet 0/1 at 8:00 on working days every week.

[Sysname-job-pc1] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo

shutdown

# Configure the SecBlade LB module to shut down GigabitEthernet 0/1 at 18:00 on working days every

week.

[Sysname-job-pc1] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown

[Sysname-job-pc1] quit

# Create scheduled task pc2, and enter its view.

[Sysname] job pc2

# Configure the task to be executed in the view of GigabitEthernet 0/2

[Sysname-job-pc2] view GigabitEthernet 0/2

# Configure the SecBlade LB module to start GigabitEthernet 0/2 at 8:00 on working days every week.

[Sysname-job-pc2] time 1 repeating at 8:00 week-day mon tue wed thu fri command undo

shutdown

# Configure the SecBlade LB module to shut down GigabitEthernet 0/2 at 18:00 on working days every

week.

[Sysname-job-pc2] time 2 repeating at 18:00 week-day mon tue wed thu fri command shutdown

[Sysname-job-pc2] quit

# Create scheduled task pc3, and enter its view.

[Sysname] job pc3

# Configure the task to be executed in the view of GigabitEthernet 0/3.

[Sysname-job-pc3] view GigabitEthernet 0/3

# Configure the SecBlade LB module to start GigabitEthernet 0/3 at 8:00 on working days every week.