R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

78
Configuration procedure
# Configure the IP address of the interface and the zone to which it belongs. (Omitted)
# Configure local user Emily, with the privilege level Monitor and service type Telnet.
• Select System > User > Local User in the navigation tree and then click Add.
Figure 44 Create a local user
• Type Emily as the username.
• Select Monitor as the user privilege level.
• Select Telnet as the service type.
• Type aabbcc as the password.
• Type aabbcc as the confirm password.
• Click Apply.
Displaying online user
Online users here refer to the users getting online after passing AAA authentication.
Select System > User > Online User from the navigation tree. The online user list appears, as shown
in Figure 45.
Figure 45 Online us
er list
Table 12 Fields of the online user list
Field Descri
p
tion
User ID Identity of the online user in the system
User Name User name used for authentication
IP Address IP address of the user’s host