R3204P16-HP Load Balancing Module System Management Configuration Guide-6PW101

Figure 50 Network diagram for configuring unified multi-system management

Configuration procedure

1. Configure the A7500

# Configure the unified management VLAN.

<A7500> system-view

[A7500] unified-management vlan 3000

# Enable ACSEI server.

[A7500] acsei server enable

# Configure the local user to log in to the web interface.

[A7500] local-user admin

[A7500-luser-admin] password simple admin

[A7500-luser-admin] authorization-attribute level 3

[A7500-luser-admin] service-type telnet

2. Configure the LB module

# Configure the unified management VLAN.

<LB> system-view

[LB] unified-management vlan 3000

# Enable ACSEI client.

[LB] interface Ten-GigabitEthernet 0/0

[LB-Ten-GigabitEthernet0/0] acsei-client enable

[LB-Ten-GigabitEthernet0/0] quit

# Configure the local user to log in to the web interface.

[LB] local-user admin

[LB-luser-admin] password simple admin

[LB-luser-admin] authorization-attribute level 3

[LB-luser-admin] service-type telnet

Configuration verification

After the configuration is completed, log in to the A7500 through the web interface. The username and

password are both admin, as shown in Figure 51.