R3204P16-HP Load Balancing Module Typical Configuration Examples-6PW101

19
Figure 25 Add a virtual service
• Type VS as the virtual service name.
• Type 172.16.1.100 as the virtual service IP address and select mask 32 (255.255.255.255).
• Select protocol TCP.
• Set port number to 0.
• Select Direct Routing as the forwarding mode.
• Select the real service group http.
• Select the Enable Virtual Service option.
• Click Apply.
Figure 26 Virtual service VS created successfully
4. Save the configuration
From the navigation tree, select System > Maintenance. Click the Save tab. Click Apply to save the
current configuration.