R3204P16-HP Load Balancing Module Typical Configuration Examples-6PW101

35
Figure 50 Add a virtual service
• Type FWT as the virtual service name
• Type 192.168.10.0 as the virtual service IP address and select mask 24 (255.255.255.0).
• Select Any as the protocol type.
• Set port number to 0.
• Select Firewall Forwarding as the forwarding mode.
• Select the real service group http.
• Select the Enable Virtual Service option.
• Click Apply.
Figure 51 Virtual service FWT created
Configurations on FW_1
Configuration procedures
1. Configure a packet filtering firewall policy.
[Sysname] firewall packet-filter enable
[Sysname]firewall packet-filter default permit