R3204P16-HP Load Balancing Module Typical Configuration Examples-6PW101

41
#
interface Ten-GigabitEthernet0/0.23
vlan-type dot1q vid 23
ip address 8.0.0.2 255.0.0.0
#
interface Ten-GigabitEthernet0/0.24
vlan-type dot1q vid 24
ip address 9.0.0.2 255.0.0.0
#
interface Ten-GigabitEthernet0/0.100
vlan-type dot1q vid 100
ip address 192.168.10.207 255.255.255.0
Configuring gateway load balancing in the web interface
1. Save the last hop information
From the navigation tree, select Load Balance > Global Configuration. Select the Keep Last-hop
Information option and click Apply.
Figure 53 Save the last-hop information
Configurations on a client and a server
1. On the client, configure a route, with the destination address as the virtual IP 192.168.10.0/24
and the next hop address as 11.0.0.1.
2. On the server, specify the gateway address as 192.168.10.207, the IP address of a subinterface
on the LB module.
Verification
Verification method
Use the PC as a client to access the web server.
Verification result
The client can access the server normally.