R3204P16-HP Load Balancing Module Typical Configuration Examples-6PW101

Configuration procedures

Configurations on A7503_1

Configuration procedures

1. Create VLANs.

# Create VLAN 15 and VLAN 192.

<Sysname> Sysname-view

[Sysname] vlan 15 192

[Sysname] quit

2. Create VLAN interfaces and configure IP addresses for the interfaces, and then configure VRRP

groups.

[Sysname] interface Vlan-interface 15

[Sysname-Vlan-interface15] ip address 15.0.0.2 255.255.255.0

[Sysname-Vlan-interface15] vrrp vrid 15 virtual-ip 15.0.0.4

[Sysname-Vlan-interface15] vrrp vrid 15 priority 105

[Sysname-Vlan-interface15] quit

[Sysname] interface Vlan-interface 192

[Sysname-Vlan-interface192] ip address 192.168.102.106 255.255.252.0

[Sysname-Vlan-interface192] vrrp vrid 192 virtual-ip 192.168.102.123

[Sysname-Vlan-interface192] vrrp vrid 192 priority 105

[Sysname-Vlan-interface192] quit

3. Assign interfaces to the VLANs.

[Sysname] interface GigabitEthernet 2/0/7

[Sysname-GigabitEthernet2/0/7] port access vlan 15 //Connects to the client

[Sysname-GigabitEthernet2/0/7] quit

[Sysname] interface GigabitEthernet 2/0/9

[Sysname-GigabitEthernet2/0/9] port access vlan 192 //Connects to servers

[Sysname-GigabitEthernet2/0/9] quit

4. Configure the interface as a trunk interface, and assign it to VLAN 192.

[Sysname]interface GigabitEthernet 2/0/17

[Sysname-GigabitEthernet2/0/17] port link-type trunk //Connects to the client

[Sysname-GigabitEthernet2/0/17] undo port trunk permit vlan 1

[Sysname-GigabitEthernet2/0/17] port trunk permit vlan 192 //Connecting interface of

the two A7503 switches, used to create VRRP group 192 and VRRP group 191

[Sysname-GigabitEthernet2/0/7] quit

[Sysname] interface Ten-GigabitEthernet 4/0/1

[Sysname-Ten-GigabitEthernet4/0/1] port link-type trunk //10GE interface used by the

A7503 switch to connect the LB module

[Sysname-Ten-GigabitEthernet4/0/1] undo port trunk permit vlan 1

[Sysname-Ten-GigabitEthernet4/0/1] port trunk permit vlan 192

[Sysname-Ten-GigabitEthernet4/0/1] quit

5. Add static routes.

[Sysname] ip route-static 11.0.0.0 255.255.255.0 192.168.102.125

[Sysname] ip route-static 200.0.0.0 255.255.255.0 15.0.0.1