R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

3
acl copy
Syntax
acl copy { source-acl-number | name source-acl-name } to { dest-acl-number | name dest-acl-name }
View
System view
Default level
2: System level
Parameters
source-acl-number: Specifies a source ACL that already exists by its number:
• 2000 to 2999 for IPv4 basic ACLs
• 3000 to 3999 for IPv4 advanced ACLs
• 4000 to 4999 for Ethernet frame header ACLs
name source-acl-name: Specifies a source ACL that already exists by its name. The source-acl-name
argument takes a case-insensitive string of 1 to 63 characters.
dest-acl-number: Assigns a unique number to the ACL you are creating. This number must be from the
same ACL category as the source ACL. Available value ranges include:
• 2000 to 2999 for IPv4 basic ACLs
• 3000 to 3999 for IPv4 advanced ACLs
• 4000 to 4999 for Ethernet frame header ACLs
name dest-acl-name: Assigns a unique name to the ACL you are creating. The dest-acl-name takes a
case-insensitive string of 1 to 63 characters. It must start with an English letter and to avoid confusion,
cannot be all. For this ACL, the system automatically picks the smallest number from all available
numbers in the same ACL category as the source ACL.
Description
Use acl copy to create an ACL by copying an ACL that already exists. The new ACL has the same
properties and content as the source ACL, but not the same ACL number and name.
You can assign a name to an ACL only when you create it. After an ACL is created with a name, you
cannot rename it or remove its name.
Examples
# Create IPv4 basic ACL 2002 by copying IPv4 basic ACL 2001.
<Sysname> system-view
[Sysname] acl copy 2001 to 2002
acl ipv6
Syntax
acl ipv6 number acl6-number [ name acl6-name ] [ match-order { auto | config } ]
undo acl ipv6 { all | name acl6-name | number acl6-number }
View
System view