R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

101
View
ISP domain view
Default level
2: System level
Parameters
url-string: URL of the self-service server, a string of 1 to 64 characters. It must start with http:// and
contain no question mark. This URL was specified by the RADIUS server administrator during RADIUS
server installation.
Description
Use self-service-url enable to enable the self-service server location function and specify the URL of the
self-service server.
Use undo self-service-url enable to restore the default.
By default, the self-service server location function is disabled.
With the self-service function, users can manage and control their accounts and passwords. Only the
RADIUS server systems provided by the Intelligent Management Center (IMC) support the self-service
function.
Examples
# For ISP domain test, enable the self-service server location function and specify the URL of the
self-service server for changing user password to http://10.153.89.94/selfservice.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] self-service-url enable http://10.153.89.94/selfservice
state (ISP domain view)
Syntax
state { active | block }
undo state
View
ISP domain view
Default level
2: System level
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting network
services.
Description
Use state to set the status of an ISP domain.
Use undo state to restore the default.
By default, an ISP domain is in active state.