R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

116
send-times: Maximum number of accounting-on packet transmission attempts, ranging from 1 to 255.
The default setting is 50.
Description
Use accounting-on enable to configure the accounting-on feature. This feature enables the firewall to,
after rebooting, automatically sends an accounting-on message to the RADIUS accounting server to log
out online users.
Use undo accounting-on enable to disable the accounting-on feature.
By default, the accounting-on feature is disabled.
Parameters set with the accounting-on enable command take effect immediately.
NOTE:
A
fter executing the accounting-on enable command, issue the save command to make sure that the
command takes effect after the firewall reboots. For information about the save command, see
System
Management and Maintenance Command Reference
.
Related commands: radius scheme.
Examples
# Enable the accounting-on feature for RADIUS authentication scheme radius1, set the retransmission
interval to 5 seconds, and set the transmission attempts to 15.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable interval 5 send 15
attribute 25 car
Syntax
attribute 25 car
undo attribute 25 car
View
RADIUS scheme view
Default level
2: System level
Parameters
None
Description
Use attribute 25 car to specify to interpret the RADIUS class attribute (attribute 25) as CAR parameters.
Use undo attribute 25 car to restore the default.
By default, RADIUS attribute 25 is not interpreted as CAR parameters.
Related commands: display radius scheme and display connection.
Examples
# Specify to interpret RADIUS attribute 25 as CAR parameters.