R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

159
If you configure the command repeatedly, only the last configuration takes effect.
You can remove an authorization server only when it is not used by any active TCP connection to send
authorization packets. Removing an authorization server affects only authorization processes that occur
after the remove operation.
NOTE:
The VPN specified by this command takes precedence over the VPN specified for the HWTACACS
scheme.
Related commands: display hwtacacs and vpn-instance (HWTACACS scheme view).
Examples
# Configure the IP address and port number of the primary authorization server for HWTACACS scheme
hwt1 a s 10 .16 3 .155 .13 a n d 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49
reset hwtacacs statistics
Syntax
reset hwtacacs statistics { accounting | all | authentication | authorization }
View
User view
Default level
1: Monitor level
Parameters
accounting: Clears HWTACACS accounting statistics.
all: Clears all HWTACACS statistics.
authentication: Clears HWTACACS authentication statistics.
authorization: Clears HWTACACS authorization statistics.
Description
Use reset hwtacacs statistics to clear HWTACACS statistics.
Related commands: display hwtacacs.
Examples
# Clear all HWTACACS statistics.
<Sysname> reset hwtacacs statistics all
reset stop-accounting-buffer (for HWTACACS)
Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name