R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

163
secondary authorization
Syntax
secondary authorization ip-address [ port-number | vpn-instance vpn-instance-name ] *
undo secondary authorization
View
HWTACACS scheme view
Default level
2: System level
Parameters
ip-address: IP address of the secondary HWTACACS authorization server, in dotted decimal notation.
The default setting is 0.0.0.0.
port-number: Service port number of the secondary HWTACACS authorization server. It ranges from 1
to 65535 and defaults to 49.
vpn-instance vpn-instance-name: Specifies the VPN to which the secondary HWTACACS authorization
server belongs, where vpn-instance-name is a case-sensitive string of 1 to 31 characters. If the server is
on the public network, do not specify this option.
Description
Use secondary authorization to specify the secondary HWTACACS authorization server.
Use undo secondary authorization to remove the configuration.
By default, no secondary HWTACACS authorization server is specified.
The IP addresses of the primary and secondary authorization servers cannot be the same. Otherwise, the
configuration fails.
If the specified server resides on a VPN, you also need to specify that VPN with the secondary
authorization command to ensure normal communication with the server. The VPN specified here takes
precedence over the VPN specified for the HWTACACS scheme.
If you configure the command repeatedly, only the last configuration takes effect.
You can remove an authorization server only when it is not used by any active TCP connection to send
authorization packets. Removing an authorization server affects only authorization processes that occur
after the remove operation.
Related commands: display hwtacacs and vpn-instance (HWTACACS scheme view).
Examples
# Configure the secondary authorization server 10.163.155.13 with TCP port number 49.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary authorization 10.163.155.13 49
stop-accounting-buffer enable (HWTACACS scheme view)
Syntax
stop-accounting-buffer enable