R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

164
undo stop-accounting-buffer enable
View
HWTACACS scheme view
Default level
2: System level
Parameters
None
Description
Use stop-accounting-buffer enable to enable the firewall to buffer stop-accounting requests to which no
responses are received.
Use undo stop-accounting-buffer enable to disable the buffering function.
By default, the firewall buffers stop-accounting requests to which no responses are received.
Stop-accounting requests affect the charge to users. A NAS must make its best effort to send every
stop-accounting request to the HWTACACS accounting servers. For each stop-accounting request
getting no response in the specified period of time, the NAS buffers and resends the packet until it
receives a response or the number of transmission attempts reaches the configured limit. In the latter case,
the NAS discards the packet.
Related commands: reset stop-accounting-buffer and display stop-accounting-buffer.
Examples
# In HWTACACS scheme hwt1, enable the firewall to buffer the stop-accounting requests getting no
responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
timer quiet (HWTACACS scheme view)
Syntax
timer quiet minutes
undo timer quiet
View
HWTACACS scheme view
Default level
2: System level
Parameters
minutes: Primary server quiet period, in minutes. It ranges from 1 to 255.
Description
Use timer quiet to set the quiet timer for the primary server, that is, the duration that the status of the
primary server stays blocked before resuming the active state.
Use undo timer quiet to restore the default.