R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

165
By default, the primary server quiet period is 5 minutes.
Related commands: display hwtacacs.
Examples
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
timer realtime-accounting (HWTACACS scheme view)
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
HWTACACS scheme view
Default level
2: System level
Parameters
minutes: Real-time accounting interval in minutes, zero or a multiple of 3 in the range of 3 to 60. A value
of zero means "Do not send online user accounting information to the HWTACACS server."
Description
Use timer realtime-accounting to set the real-time accounting interval.
Use undo timer realtime-accounting to restore the default.
By default, the real-time accounting interval is 12 minutes.
For real-time accounting, a NAS must transmit the accounting information of online users to the
HWTACACS accounting server periodically. This command is for setting the interval.
The setting of the real-time accounting interval somewhat depends on the performance of the NAS and
the HWTACACS server. A shorter interval requires higher performance. Use a longer interval when there
are a large number of users (more than 1000, inclusive).
Table 34 Recommended real-time accounting intervals
Number of users
Real-time accountin
g
interval (minutes)
1 to 99 3
100 to 499 6
500 to 999 12
1000 or more 15 or more
Examples
# Set the real-time accounting interval to 51 minutes for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1