R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

31
Session management commands
application aging-time
Syntax
application aging-time { dns | ftp | msn | qq | sip } time-value
undo application aging-time [ dns | ftp | msn | qq | sip ]
View
System view
Default level
2: System level
Parameters
dns: Specifies the aging time for DNS sessions.
ftp: Specifies the aging time for FTP sessions.
msn: Specifies the aging time for MSN sessions.
qq: Specifies the aging time for QQ sessions.
sip: Specifies the aging time for SIP sessions.
time-value: Aging time, which ranges from 5 seconds to 100000 seconds.
Description
Use application aging-time to set the aging time for sessions of an application layer protocol.
Use undo application aging-time to restore the default. If no application layer protocol type is specified,
the command restores the session aging times for all the application layer protocols to the defaults.
Examples
# Set the aging time for FTP sessions to 1800 seconds.
<Sysname> system-view
[Sysname] application aging-time ftp 1800
display session relation-table
Syntax
display session relation-table [ vd-name vd-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: System level