R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

37
Field Descri
p
tion
State
Session status. Possible values are:
• Accelerate
• SYN
• TCP-EST
• FIN
• UDP-OPEN
• UDP-READY
• ICMP-OPEN
• ICMP-CLOSED
• RAWIP-OPEN
• RAWIP-READY
Start Time Session establishment time
TTL Remaining lifetime of the session, in seconds.
VD-name Name of virtual device
Zone(in) Security zone (in)
Zone(out) Security zone (out)
Received packet(s)(Init) Counts of packets and bytes from the initiator to the responder
Received packet(s)(Reply) Counts of packets and bytes from the responder to the initiator
Total find Total number of found sessions
reset session
Syntax
reset session [ vd-name vd-name ] [ source-ip source-ip ] [ destination-ip destination-ip ] [ protocol-type
{ icmp | raw-ip | tcp | udp } ] [ source-port source-port ] [ destination-port destination-port ]
[ vpn-instance vpn-instance-name ]
View
User view
Default level
2: System level
Parameters
vd-name vd-name: Specifies the sessions of the specified virtual device. The vd-name argument specifies
the name of a virtual device. It is a case-insensitive string of 1 to 20 characters, which can be only
numerals, letters and underlines.
source-ip source-ip: Specifies the sessions with the specified source IP address of the initiator.
destination-ip destination-ip: Specifies the sessions with the specified destination IP address of the
initiator.
protocol-type { icmp | raw-ip | tcp | udp }: Specifies the sessions of the specified protocol type. The
protocol types include ICMP, Raw IP, TCP, and UDP.