R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

41
Connection limit configuration commands
connection-limit apply policy
Syntax
connection-limit apply policy policy-number
undo connection-limit apply policy policy-number
View
System view
Default level
2: System level
Parameters
policy-number: Number of an existing connection limit policy. The value can only be 0.
Description
Use connection-limit apply policy to apply a connection limit policy. The connection limit policy to be
applied must contain at least one limit rule.
Use undo connection-limit apply policy to remove the application.
After a connection limit policy is applied, you cannot add, remove, or modify the connection limit rules
in the connection limit policy view.
Related commands: connection-limit policy.
Examples
# Apply connection limit policy 0.
<Sysname> system-view
[Sysname] connection-limit apply policy 0
connection-limit policy
Syntax
connection-limit policy policy-number
undo connection-limit policy { policy-number | all }
View
System view
Default level
2: System level
Parameters
policy-number: Specifies the number of a connection limit policy. A policy number uniquely identifies a
connection limit policy. The value can only be 0.