R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

46
display portal acl
Syntax
display portal acl { all | dynamic | static } interface interface-type interface-number [ | { begin | exclude
| include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
all: Displays all portal access control lists (ACLs), including dynamic and static portal ACLs.
dynamic: Displays dynamic portal ACLs—ACLs generated dynamically after a user passes portal
authentication.
static: Displays static portal ACLs—ACLs generated through portal related configuration, such as
portal-free rule configuration.
interface interface-type interface-number: Displays the ACLs on the specified interface.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display portal acl to display the ACLs on a specific interface.
Examples
# Display all ACLs on interface GigabitEthernet 0/1.
<Sysname> display portal acl all interface gigabitethernet 0/1
GigabitEthernet0/1 portal ACL rule:
Rule 0
Inbound interface : GigabitEthernet0/1
Type : static
Action : permit
Source:
IP : 0.0.0.0
Mask : 0.0.0.0
MAC : 0000-0000-0000
Interface : any
VLAN : 0
Protocol : 0
Destination:
IP : 192.168.0.111