R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

52
Field Descri
p
tion
Mask Subnet mask of the destination IP address in the portal-free rule
display portal interface
Syntax
display portal interface interface-type interface-number [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display portal interface to display the portal configuration of an interface.
Examples
# Display the portal configuration of interface GigabitEthernet 0/1.
<Sysname> display portal interface gigabitethernet 0/1
Interface portal configuration:
GigabitEthernet0/1: Portal running
Portal server: servername
Authentication type: Direct
Authentication domain: my-domain
Authentication network:
source address : 0.0.0.0 mask : 0.0.0.0
Table 21 Command output
Field Descri
p
tion
Interface portal configuration Portal configuration on the interface
GigabitEthernet0/1
Status of the portal authentication on the interface:
• disabled—Portal authentication is disabled.
• enabled—Portal authentication is enabled but is not functioning.
• running—Portal authentication is functioning.
Portal server Portal server referenced by the interface