R3721-F3210-F3171-HP High-End Firewalls Access Control Command Reference-6PW101

73
Default level
2: System level
Parameters
max-user-number: Maximum number of users that the ISP domain can accommodate, in the range of 1
to 2147483646.
Description
Use access-limit enable to enable limitation of the number of users in an ISP domain and set the allowed
maximum number. After the number of users reaches the allowed maximum number, no more users are
accepted.
Use undo access-limit enable to restore the default.
By default, there is no limit to the number of users in an ISP domain.
System resources are limited, and user connections may compete for network resources when there are
many users. Setting a proper limit to the number of users helps provide reliable system performance.
Related commands: display domain.
Examples
# Set a limit of 500 user connections for ISP domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] access-limit enable 500
accounting command
Syntax
accounting command hwtacacs-scheme hwtacacs-scheme-name
undo accounting command
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
Description
Use accounting command to specify the command line accounting method.
Use undo accounting command to restore the default.
By default, the default accounting method for the ISP domain is used for command line accounting.
The specified HWTACACS scheme must have been configured.
Command line accounting can use only a HWTACACS scheme.
Related commands: accounting default and hwtacacs scheme.