R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

6
Figure 3 List of basic ACL rules
Figure 4 Basic ACL rule configuration page
Table 4 Configuration items
Item Descri
p
tion
Rule ID
Select the Rule ID box and enter a number for the rule.
If you do not specify a rule number, the system automatically assigns one to the rule.
IMPORTANT:
If the rule already exists, the configuration overwrites the old rule.
Operation
Select the operation to be performed for packets matching the rule.
• Permit—Allows matching packets to pass.
• Deny—Denies matching packets.
Time Range
Select a time range for the rule.
If you select None, the rule will always be effective.
Available time ranges are configured by selecting Resource > Time Range from the
navigation tree.
Non-first Fragments
Only
Select this box to apply the rule to only non-first fragments. If you do no select this box,
the rule applies to all fragments and non-fragments.
Logging
Select this box to log matching packets.
A log entry contains the ACL rule number, action on the matching packets, protocol that
IP carries, source/destination address, source/destination port number, and number of
matching packets.