R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

128

DHCP. Before passing portal authentication, a user can access only the portal server. After passing

portal authentication, the user can access Internet resources.

• A RADIUS server serves as the authentication, authorization, and accounting server.

Figure 112 Network diagram

Configuration procedure

NOTE:

• Configure IP addresses for the host, firewall, and servers as shown in Figure 112 a

nd make sure that the

can reach each other.

• Configure the RADIUS server properly to provide authentication and accounting functions for users.

1. Configure the portal server.

NOTE:

This example assumes that the portal server runs IMC PLAT 5.0-E0101L02 and IMC UAM 5.0-E0101.

# Configure the portal server.

Log on to the IMC management platform and select the Service tab. Then, select Portal Service

Management > Server from the navigation tree to enter the portal server configuration page, as shown

in Figure 113 .

• C

onfigure the portal parameters as needed. This example uses the default values.

FirewallHost

2.2.2.2/24

Gateway : 2.2.2.1/24

GE0/2

2.2.2.1/24

GE0/1

192.168.0.100/24

Portal server

192.168.0.111/24

RADIUS server

192.168.0.112/24