R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

175
Item Descri
p
tion
Send accounting-on
packets
Enable or disable the accounting-on feature.
The accounting-on feature enables the firewall to send accounting-on packets to
RADIUS servers after it reboots, making the servers forcedly log out users who
logged in through the firewall before the reboot.
IMPORTANT:
When enabling the accounting-on feature on the firewall for the first time, you must
save the configuration so that the feature takes effect after the firewall reboots.
Accounting-On Interval
Set the interval for sending accounting-on packets. This field is configurable only
when the Send accounting-on packets option is selected.
Accounting-On Attempts
Set the maximum number of accounting-on packets transmission attempts. This field
is configurable only when the Send accounting-on packets option is selected.
Attribute
Enable or disable the firewall to interpret the RADIUS class attribute as CAR
parameters.
Interpretation
6. In the RADIUS Server Configuration area, click Add to enter the RADIUS server configuration page.
Figure 141 RADIUS server configuration page
7. Configure the parameters of the RADIUS authentication servers and accounting servers as
described in Table 50.
8. Click Apply to finish server configuration.
9. Click Apply to finish RADIUS scheme configuration.
Table 50 Configuration items
Item Descri
p
tion
Server Type
Select the type of the RADIUS server to be configured. Possible values include
primary authentication server, primary accounting server, secondary
authentication server, and secondary accounting server.
IP Address Specify the IP address of the RADIUS server.
Port Specify the UDP port of the RADIUS server