R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

198
Figure 151 Network diagram
Configuring the HWTACACS server.
# Set the shared keys to expert, add a Telnet user and set a password for the user. (Details not shown.).
Configuring the Firewall
# Configure the IP address of each interface and add them to security zones. (Details not shown.)
# Configure the HWTACACS scheme system:
1. Select User > HWTACACS > Server Configuration from the navigation tree
2. Click Add as shown in Figure 152.
The system automatically creates the HWTACACS scheme and displays the HWTACACS server
configuration page, as shown in Figure 153.
Figure 152 Creating an HWTACACS scheme
3. Configure an HWTACACS authentication server for the scheme as follows:
{ Select Authentication Server as the server type.
{ Enter 10 .1.1.1 as the IP address of the primary server.
{ Enter 49 as the TCP port of the primary server.
{ Select the Shared Key box, enter expert as the shared key, and then confirm it.
4. Click Apply.
Internet
Firewall
Telnet user
HWTACACS server
10.1.1.1/24