R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

199
Figure 153 Configuring an HWTACACS authentication server
5. On the page as shown in Figure 153, configure an HWTACACS authorization server for the
scheme as follows:
{ Select Authorization Server as the server type.
{ Enter 10 .1.1.1 as the IP address of the primary server.
{ Enter 49 as the TCP port of the primary server.
{ Select the Shared Key box, enter expert as the shared key, and then confirm it.
6. Click Apply.
7. On the page as shown in Figure 153, configure an HWTACACS accounting server for the scheme
as follows:
{ Select Accounting Server as the server type.
{ Enter 10 .1.1.1 as the IP address of the primary server.
{ Enter 49 as the TCP port of the primary server.
{ Select the Shared Key box, enter expert as the shared key, and then confirm it.
8. Click Apply.
# Configure the parameters for communication between SecPath and the HWTACACS server as follows:
1. Select User > HWTACACS > Parameter Configuration from the navigation tree.
2. Select without-domain for the username format.
3. Click Apply.