R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

217
Specify IP addresses 10.1.1.0 to 10.1.1.255 as the range of hosts to be managed. The IP
address range must contain the IP address of the access device.
c. Click OK.
NOTE:
The IP address range must contain the IP address of the access device.
Figure 157 Adding an account for device management
Configuring the Firewall in the web interface
You can use either method to configure SecPath.
• Method 1:
You can configure the RADIUS scheme for SecPath in the Web interface and complete other
configurations at the CLI.
# Configure the IP address and security zone of each interface. (Details not shown.)
# Configure the RADIUS scheme system:
a. Select User > RADIUS from the navigation tree and then click Add in the RADIUS scheme list
area.
b. Configure basic information for the RADIUS scheme:
Enter system as the scheme name.
Select Extended as the server type.
Select With domain name for the username format.