R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

243
Ste
p
Command Remarks
4. Configure the password
composition policy for super
passwords.
password-control super
composition type-number
type-number [ type-length
type-length ]
Optional.
By default, a super password must
contain at least one type of
characters and each type must
contain at least one character.
In FIPS mode, a password must
contain four types of characters.
Setting a local user password in interactive mode
You can set a password for a local user in interactive mode. When doing so, you need to confirm the
password.
To set a password for a local user in interactive mode:
Ste
p
Command
1. Enter system view.
system-view
2. Create a local user and enter local user view. local-user user-name
3. Set the password for the local user in
interactive mode.
password
Displaying and maintaining password control
Task Command Remarks
Display password control
configuration information.
display password-control [ super ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Display information about users
blacklisted due to authentication
failure.
display password-control blacklist
[ user-name name | ip
ipv4-address | ipv6 ipv6-address ]
[ | { begin | exclude | include }
regular-expression ]
Available in any view
Delete users from the blacklist.
reset password-control blacklist
[ user-name name ]
Available in user view
Clear history password records.
reset password-control
history-record [ user-name name |
super [ level level ] ]
Available in user view
NOTE:
The reset password-control history-record command can delete the history password records of one or
all users even when the password history function is disabled.