R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

Figure 17 Zone classification

Zone configuration task list

Task Remarks

Selecting the virtual device to

which the specified zone

belongs

Optional

Select Device Management > Virtual Device > Device Selection from the

navigation tree to enter the virtual device selection page. For more

information, see System Management and Maintenance Configuration Guide.

By default, a virtual root device is used.

Creating a zone

Optional

By default, the following zones are available on the virtual root device:

Management, Local, Trust, DMZ and Untrust.

Configuring a zone member

Required

Add specified subnet address source, interfaces, Layer 2 Ethernet interface +

VLAN to the created zone, and the interfaces that can be added and the

VLANs must be on the same virtual device with the zone.

Creating a zone

1. Select Device Management > Zone from the navigation tree.