R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

34
Item Descri
p
tion
Port Number
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.
ACL
Associate the HTTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
HTTPS
Enable HTTPS
service
Specify whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Port Number
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, make sure that the port is not used by other service.
ACL
Associate the HTTPS service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
Certificate
Set the local certificate for the HTTPS service. The list displays certificate
subjects.
You can configure the available PKI domains by selecting VPN > Certificate
Management from the navigation tree at the left side of the interface. For
more information, see VPN Configuration Guide.
Service management configuration examples
HTTP configuration example
Network requirements
As shown in Figure 26, Host A resides on 192.168.1.0/24 and connects to Firewall through
GigabitEthernet 0/1. Host A can always access Firewall using HTTP, but other hosts can access Firewall
using HTTP only on working days.