R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

38
b. Enter 2000 in the ACL field.
3. Click Apply.
Figure 32 Associating HTTP service with ACL 2000
HTTPS configuration example
Network requirements
As shown in Figure 33, Host can access and control Firewall through web pages. To avoid malicious
users from accessing and controlling Firewall, users use HTTPS to access web pages on Firewall. SSL is
used to authenticate servers, preventing data eavesdropping and data modification.
To meet the requirements, configure Firewall as an HTTPS server and apply for a certificate for Firewall.
The name of the certificate authority (CA) that issues certificates to Firewall and Host is CA server.
NOTE:
• This example uses a Windows server as the CA that has the Simple Certificate Enrollment Protocol
(SCEP) component installed.
• Before proceeding with the following configuration, make sure that Firewall, Host, and CA are
reachable to each other.
Figure 33 Network diagram