R3721-F3210-F3171-HP High-End Firewalls Access Control Configuration Guide-6PW101

55
Figure 57 Customized service resource configuration page
3. Configure the parameters as described in Table 16.
4. Click Apply.
Table 16 Configuration items
Item Descri
p
tion
Name
Specify a unique name for the customized service resource.
IMPORTANT:
Service and address resource names must be unique.
Description Type a description for the customized service resource.
TCP
Source Port
Set the source and destination TCP port ranges in the fields. These fields are
available after you select TCP.
• To define a single port, type the same port numbers in the two fields in a row.
• To define a port range, type two different port numbers. Make sure the second
port number is greater than the first one.
Destination
Port
UDP
Source Port
Set the source and destination UDP port ranges in the fields. These fields are
available after you select UDP.
• To define a single port, type the same port numbers in the two fields in a row.
• To define a port range, type two different port numbers. Make sure the second
port number is greater than the first one.
Destination
Port
ICMP
Type
Specify the ICMP message type and code.
These items are available after you select ICMP.
Table 17 lists the ICMP message names and their message types and codes.
Code
Other
Protocol
Protocol
Number
Specify the protocol to be carried by IP.
This item is available after you select Other Protocol and cannot be set to 1 (for
ICMP), 6 (for TCP), or 17 (UDP).