R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

5
[Y/N]:y
[Sysname-ui-vty0]
# Telnet to 192.168.1.40 to verify the configuration:
The device automatically. Telnets to 192.168.1.41. The following output is displayed:
C:\> telnet 192.168.1.40
******************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<Sysname>
Trying 192.168.1.41 ...
Press CTRL+K to abort
Connected to 192.168.1.41 ...
******************************************************************************
* Copyright (c) 2010-2011 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
<Sysname.41>
This operation is the same as directly logging in to the device at 192.168.1.41. If the telnet connection to
192.168.1.41 is broken down, the telnet connection to 192.168.1.40 breaks down at the same time.
command accounting
Syntax
command accounting
undo command accounting
View
User interface view
Default level
3: Manage level
Parameters
None
Description
Use command accounting to enable command accounting.
Use undo command accounting to restore the default.
By default, command accounting is disabled. The accounting server does not record the commands that
users have executed.
When command accounting is enabled and command authorization is not, every executed command is
recorded on the HWTACACS server.