R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

7
Default level
2: System level
Parameters
5: Sets 5 data bits for each character.
6: Sets 6 data bits for each character.
7: Sets 7 data bits for each character.
8: Sets 8 data bits for each character.
Description
Use databits to set data bits for each character.
Use undo databits to restore the default.
By default, 8 data bits are set for each character.
NOTE:
• The command is only applicable to console ports.
• The data bits setting must be the same for the user interfaces of the connecting ports on the device and
the terminal device for communication.
Examples
# Specify 5 data bits for each character.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-ui-console0] databits 5
display acsei-client information
Syntax
display acsei-client information [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display acsei-client information to display ACSEI client information.