R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

11
Field Descri
p
tion
Operation status
Operation status:
• Running—The HTTPS service is enabled.
• Stopped—The HTTPS service is disabled.
display telnet client configuration
Syntax
display telnet client configuration [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display telnet client configuration to display the configuration of the device when it serves as a telnet
client.
This command is not supported in FIPS mode.
Examples
# Display the configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client configuration
The source IP address is 1.1.1.1.
The output shows that when the device serves as a client, the source IPv4 address for sending Telnet
p a c ke t s i s 1.1.1.1.
display user-interface
Syntax
display user-interface [ num1 | { console | vty } num2 ] [ summary ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level