R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

13
Field Descri
p
tion
Type Type and relative number of the user interface.
Tx/Rx Transmission/Receive rate of the user interface
Modem
Whether the modem is allowed to dial in (in), dial out (out), or both (inout)
By default, a hyphen (-) is displayed to indicate that this function is disabled.
Privi Indicates the command level of a user under that user interface
Auth Authentication mode for the users, which can be A, P, L, and N.
Int
The physical port that corresponds to the user interface. For user interfaces of console
ports and VTY interfaces, a hyphen (-) is displayed.
A AAA authentication
N No authentication
P Password authentication
# Display summary about all user interfaces.
<Sysname> display user-interface summary
User interface type : [CON]
0:U
User interface type : [TTY]
1:XXXX XXXX XXXX XXXX
17:XXXX XXXX XXXX XXXX
33:XXXX XXXX XXXX XXXX
User interface type : [VTY]
49:UXXX X
2 character mode users. (U)
52 UI never used. (X)
2 total UI in use
Table 5 Command output
Field Descri
p
tion
User interface type Type of user interface (CON/VTY).
0:X
0 represents the absolute number of the user interface. X means this
user interface is not used; U means this user interface is in use. For
example, 49:UXXX X shows that the absolute number of the first user
interface is 49, and the user interface is in use. User interfaces 50,
51, and 52 are not in use.
character mode users. (U) Number of users, or, the total number of character U.
UI never used. (X)
Number of user interfaces not used, or, the total number of
character X.
total UI in use Total number of user interfaces in use.