R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

28
send
Syntax
send { all | num1 | { console | vty } num2 }
View
User view
Default level
1: Monitor level
Parameters
all: Sends messages to all user interfaces.
console: Specifies the console user interface.
vty: Specifies the VTY user interface.
num1: Absolute number of a user interface, which typically starts from 0.
num2: Relative number of a user interface.
Description
Use send to send messages to the specified user interfaces.
To end message input, press Ctrl+Z. To cancel message input and return to user view, press Ctrl+C.
Examples
# Send message hello abc to the user interface of console port 0.
<Sysname> send console 0
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
hello abc^Z
Send message? [Y/N]:y
<Sysname>
***
***
***Message from con0 to con0
***
hello abc
<Sysname>
# Before you restart the device, follow these steps to inform users accessing the device through other user
interfaces:
1. Display information about all users
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
+ 49 VTY 0 00:00:00 TEL 3