R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

29
50 VTY 1 00:00:03 TEL 3
Following are more details.
VTY 0 :
Location: 192.168.1.26
VTY 1 :
Location: 192.168.1.20
+ : Current operation user.
F : Current operation user work in async mode.
// The output shows that a user is using VTY 1.
2. Send a notification to the user of VTY 1.
<Sysname> send vty 1
Enter message, end with CTRL+Z or Enter; abort with CTRL+C:
Your attention please. I will reboot the system in 3 minutes!^Z
Send message? [Y/N]:y
// A message is sent to VTY 1, and displayed on VTY 1 (suppose that the user of VTY 1 is entering
the interface gigabitethernet command).
[Sysname] interface eth
***
***
***Message from vty0 to vty1
***
Your attention please. I will reboot the system in 3 minutes!
set authentication password
Syntax
set authentication password { cipher | simple } password
undo set authentication password
View
User interface view
Default level
3: Manage level
Parameters
cipher: Cipher text password.
simple: Plain text password.
password: A case-sensitive string. If the password format is simple, the password argument must be in
plain text, and the configuration file saves the password in plain text. If the format is cipher, password
can be either in cipher text or in plain text, and the configuration file always saves the password in cipher
text. A plain text password can be a string of no more than 16 characters, 1234567 for example. A
cipher text password or the encrypted version of the plain text password comprises 24 characters, such
as _(TT8F]Y\5SQ=^Q`MAF4<1!!.