R3721-F3210-F3171-HP High-End Firewalls Getting Started Command Reference-6PW101

31
% Disable ui-vty0-4 , are you sure? [Y/N]:y
[Sysname-ui-vty0-4]
The following message appears when a terminal tries to Telnet to the device:
The connection was closed by the remote host!
speed (user interface view)
Syntax
speed speed-value
undo speed
View
User interface view
Default level
2: System level
Parameters
speed-value: Transmission rate in bps.
The transmission rates available with asynchronous serial interfaces include:
• 300 bps
• 600 bps
• 1200 bps
• 2400 bps
• 4800 bps
• 9600 bps
• 19200 bps
• 38400 bps
• 57600 bps
• 115200 bps
The transmission rate varies with devices and configuration environment.
Description
Use speed to set the transmission rate on the user interface.
Use undo speed to restore the default transmission rate.
By default, the transmission rate is 9600 bps.
NOTE:
• The command is only applicable to the console port.
• The transmission rate setting must be identical for the user interfaces of the connecting ports on the
device and the target terminal device for communication.
Examples
# Set the transmission rate on the console user interface to 19200 bps.
<Sysname> system-view